G14-3 3 Stage CR Diesel Stroke Measuring CRM900 Common Rail Tools

Stage 3 Diesel Common Rail Injector Repair Tool

Common Rail Injector Measurement Tools Kit

TESTING:
1. adjust needle lift
2. adjust needle opening pressure
3. adjust total lift of the armature assembly
4. adjust actual lift of armature assembly
5. adjust solenoid air gap
6. adjust solenod springs compression
7. Dring armatur

Tel:0086-18253885135

Email: info@beacon-machine.com

inquiry now

Introduction

Common Rail Injector Repair Stage 3 Rebuild Injector after Component Being Replaced:
Injector Critical dimensions are accurately controlled by using the calibration shims or spacers of exact thicknesses in the
injector during injector rebuild to meet Bosch spec tolerance of 1um.

1: Intuitive, step-by-step instruction to direct user to rebuild injector
Measure thickness of calibration shims
Measure dimension of injector components
Provide the required thickness of calibration shims

2: Complete database to cover common rail injectors
CRI 1, CRI 2, CRI 3 for Automotive engine

CRIN 1, CRIN 2 for Commercial vehicle engine